How to fix the navigation lights?
Most of the beacon lights nowadays are integrated, and customers basically only need to fix the base when they buy the beacon lights. Take the current general GZ155 beacon light, the outer size of this light is 220*220*470mm, and the bottom diameter is 220mm. According to the manufacturer of the abrasive tool, there are generally two types, probably round 4 holes and waist shape 4 holes. Because of the waist shape, I won't say more about it because of its strong adaptability. The basic shape of the circle is a pitch circle of 195mm, and 4 holes are evenly distributed with a diameter of 12~14mm. This is when the obstruction light is installed separately. If the customer needs to buy a bracket, then the fixing method of the bracket must be considered: the bracket needs to be installed at both ends, one end is connected to the lamp, and the installation size is the same as that of the lamp; the other end is used to fix on the wall For obstacles, the installation size can be customized according to customer requirements, otherwise the size is the same as the other end. Basically, they are fixed with M12~14 bolts, which are simple and convenient. Pay attention to the firmness during installation to prevent potential safety hazards caused by later falling off.
