Megatro 110kv 1ggc1-Zg1 Sc Tangent Steel Pole

In the use of products, it can help customers to select the appropriate Cellular Radio Tower, Transmission Line Steel Galvanized Pole Tower, Aviation Obstruction Lights, and provide technical support for after-sales service. Our company has a complete after-sales service network, can provide you with full support and solve your problems timely. We adhere to the quality-oriented, efficiency first, continuous improvement, people-oriented management philosophy.

Single Circuit Power Poles

Type: Straight Pole, Tensile Pole, Turn Pole  for power pole

Suit for Electricity distribution

Shape: Conoid, Multi-pyramidal, Columniform, polygonal or conical 

Material: Q345B/A572, minimum yield strength>=345n/mm2

               Q235B/A36, minimum yield strength>=235n/mm2

As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, SS400, SS490, to ST52-

Tolerances of dimension: +- 2%

Power voltage: 10 KV ~550 KV

Safety Factor:

Safety factor for conducting wine: 8

Safety factor for grounding wine: 8

Design Load in Kg: 300~ 1000 Kg applied to 50cm from the top  for power pole

Marks: Name plate through rivet or glue, engrave, emboss as per customer requirement

Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required

Joint of Poles: Insert mode, inner flange mode, face to face joint mode

Design of pole: Against earthquake of 8 grade  for power pole

Wind Speed: 160 Km/Hour. 30 m /s for power pole

Minimum yield strength: 355 mpa  for power pole

Minimum ultimate tensile strength: 490 mpa  for power pole

Max ultimate tensile strength: 620 mpa  for power pole

Standard: ISO 9001 for power pole

Length of per section: Within 14m once forming without slip joint

Welding: We has past flaw testing.Internal and external double welding makes the welding beautiful in shape

Welding Standard: AWS ( American Welding Society ) D 1.1

Thickness: 1mm to 30 mm

Production Process

Raw material test → Cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration →Deburr→Galvanization or powder coating ,painting →Calibration →Thread →Packages

Packages

Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.

With our own efficient manufacturing capacity, we ensure that deliverability and the batch sizes of our Megatro 110kv 1ggc1-Zg1 Sc Tangent Steel Pole are in line with the dynamics of our markets at all times. We can design, develop and manufacture the products according to the requirements of customers, so as to make the customers satisfied. We establish good cooperative relations with customers and strive for vigorous development.