Home > News > Content

Product Categories

Contact Information

  • Tel: +86-571-63136839
  • Fax: +86-571-63136839
  • Brooks: +8613666651334
  • Skype: brookslilac
  • Add: #3Rd,Dongzhou industrial Park,Fuyang district, Hangzhou city, Zhejiang province,China.
  • E-mail: brooks@dbtower.cn
  • Aviation Light Sinstallation Specification
    Jun 12, 2018

    The requirements for installing air obstacle lights on buildings of different heights are not all the same, but one thing that is the same is that obstacles should mark the top and the edge of obstacles on the setting of obstacles. That is to say, Gaohe is wide. Some requirements for the installation of aviation obstacle lights in different buildings:
    First, if the top of the object is Gaochu's boundary ground more than 45 meters, an obstacle lamp must be added to its middle layer, and the interval between the middle layer must not be more than 45 meters, and it must be as equal as possible. The ultra-high buildings above 100 meters in the city should consider the addition of obstacle lights in the middle floor.
    Second, the obstacle lights set up by the large buildings should be able to see the outline of the object from all aspects, and the horizontal direction can also refer to the obstacle lights set at a distance of about 45 meters.

    Third, for 105 meters of ultra-high objects, cable towers, or tower towers, the medium light intensity A obstacle light should be set at the top, and it should be a white flash, and the red medium light intensity B obstacle light should be set on the lower layer.
    Fourth, ultra-high objects higher than 150 meters, such as radio and television towers, large over cable-stayed bridges, etc., should be equipped with Gaoguangqiang type A obstacle lights at the top, and should be used in conjunction with medium and Gaoguangqiang obstacle lights.
    The Ultra High Pressure Transmission Line Tower should be equipped with a Gaoguangqiang B obstacle lamp and flash for three levels of synchronization. The location is the bottom point of the tower, the top of the tower, and the cable drooping, and it must be located on the outside of the tower along the cable line.